Solid wood panels produced according to your dimensions.
Our solid wood panels are produced from selected wood, which is cut in the company´s own sawmill according to high qualitiy standards. The panels available in different wood types are especially used in individual interior construction (table tops, stair construction, cover boards,…).

DESIGN

Fully solid class AB/C and/or AB/AB, with continous lamella, glued butted together. Wood moisture 8-10 %, D3 glued. Surface sanded (K100), edge cut (edge processing against surcharge).

CLASSIFICATION OF THE COMPANY NOTHEGGER MASSIV:

A.

Sober, balanced, decorative appearance with approximately same colour, carefully selected. Virtually without features typical of wood types.

B.

Lively appearance, occasional features typical of wood types, sealed surface.

C.

Without special requirements for parts not visible. No sealed surface, cracks, knotholes and occasional incompletely dressed lamella.

Note: When installing solid wood panels, one should ensure that it is possible for the boards to expand and shrink, expecially in width. Wood is a living, hygroscopic material that reacts to carying air moisture. 

BARS

In the case of solid wood boards, we generally recommend the use of bars, which take over the function of dovetail battens and allow swelling and shrinkage of the board with slotted hole screw joints, but prevent warping.

* Lamella width with 32 and 40 mm thickness, rising from 5-15 cm.

** Lamella width wiith 52 mm thickness, remains same at 42 mm.